Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 00:58

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Because the load is inductive, the current lags the voltage.(by a bit).

what exactly is a ‘surge’ protector?

(Dc diagram shown, AC is similar).

Oregon lands a commitment from one of the nation's top WRs Messiah Hampton - On3.com

so, what happens?

A fuse is a non-resetable over current circuit protector.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Is Replika conscious?

2024–10–16 [ OO OLAOYE OYEBODE ]

the problem then depends on "how fast does the fuse operate?".

There are two important concepts here.

Dobbins: 'No-brainer' joining ascending Broncos - ESPN

There are three different concepts here that are getting confused.

At one ohm, the resistor has a maximum of 1 watt power.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

14,000-year-old mummified ‘puppies’ weren’t dogs at all, new research shows - CNN

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Upvotes:

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Atheists who have read the Bible and think that contains immoral things, why do you assume that?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Imagine we could fly into space and take a selfie of our galaxy. This spacecraft made the most detailed map of the Milky Way ever - BBC Sky at Night Magazine

This device then solves the entire problem.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Barnstars:

Stop Work Orders At NASA JPL - NASA Watch

This is where the MOV conducts again, and dissipated the energy.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

In schematic diagrams this is the symbol for a fuse:

My scammer is blackmailing me. If I don't pay 300 euros, he will send my intimate photos to my relatives. What should I do?

eight

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

a photo is worth a thousand words.

2000 times the volume of Earth! These scientists made a discovery, this planet in our solar system was twice as large 4.5 billion years ago. - Farmingdale Observer

The other is “what does a “fuse” do?”

It also is a device that limits the change in current flow.

These are simplified answers to the original question, and does not change anything I wrote above.

What is Alan Kay’s view on analytic idealism by Bernardo Kastrup?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

He then describes Rainy Season and Lightning.

One

Feds poised to approve SpaceX’s takeover of another military launch pad - Ars Technica

Now when you have a certain ac resistance, then a current flows in a loop.

What does a fuse do?

[old diagram got deleted by accident]

Is Farage right to blame the housing crisis in the UK on migration?

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Nintendo releases more Switch 1 game updates to improve Switch 2 compatibility - Nintendo Everything

What is lightning?

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

What are the challenges associated with the birth narratives of Jesus?

But it can get overloaded, and no longer works.

The third is lightning and “how it gets conducted into a home.”

Edit 2024–10.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

One is “what exactly is in a ‘surge protector’ ? ”

but this device (an Inductor) … impedes the rapid changes in the current.

The bolt then partially travels down the line to your home.

nine

2024–10–14 [Omar Gharbi Omar Gharbi ]

He then asserts :

This one hit behind the barn.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is 'the assistant's answer'

The MOV will conduct when the voltage exceeds 50% of line voltage.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

For this case there are devices called Metal oxide varistors (MOV).

But… the neutral is now “floating” because of the 1 ohm resistance.

[image of Common-mode choke]

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

An AC voltage/ current source, and an ac inductive load.

First Sentence:

At least they know the answer if they wanted it.

He then describes the function of a fuse.

These devices are installed between the “hot” and “neutral” and protective ground.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Here is a simplified AC power diagram.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

A circuit breaker is similar, but is resettable.

I post the exact comment here.

2024–10–10[John johnson John Johnson ]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

It seems Mohan does not understand the difference between a comment and an Answer.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

but I think this circuit , shows a few more pieces.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

So, the voltage could go up to 500 volts, and the fuse will not open up.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.